Home | PASMA Training

PASMA Training Courses for Mobile Access Towers

Print

PASMA

 Course Summary:-

  • One day training course (8.30am to 4.00pm) from £125 per person, plus VAT (minimum 3 delegates)
  • Single delegates can be added to an existing course
  • Accredited by PASMA (Prefabricated Access Suppliers and Manufacturers Association), ID Card and Certificate provided (valid for a period of 5 years)
  • PPE including Safety Boots required
  • On Site training available (subject to certain requirements)
  • Saturday training available (at an additional cost – minimum 3 delegates)
  • Courses available to customer demand

Whether you are an individual or a large company, the Work at Height Regulations impact upon your work procedures and methods whilst at work.  ALL operatives working at height must be competent, which includes an understanding of the equipment they are using to work at height.  The PASMA Standard Operator’s Course is designed to instruct up to a maximum of 12 delegates at a time, and is aimed at anyone in your organisation who assemble, alter, dismantle, move, inspect and most importantly USE Alloy or Fibreglass Mobile Access Towers in the work place.  This not only includes construction sites but all work places, such as Schools, Offices and Factories both internally and externally.  This course is available as an Open Course at our Training Centres in Southend and Chelmsford, or On-Site (subject to suitable conditions).

Tower Training Tower Training

 

How Much Will it Cost?

Training courses are run for groups of 3 to 12 people at a cost of £125 per person, plus VAT.  Discounts are available for larger groups, as follows:-

Pasma Charges
No. People
Cost Each
 1  £125.00
 2  £125.00
 3  £120.00
 4  £115.00
 5  £110.00
 6  £105.00
 7  £100.00
 8  £95.00
 9  £90.00
 Cost for the 11th & 12th person £50.00 each
 11  £50.00
 12  £50.00
Additional cost to do on a Saturday
£100.00 per group (minimum 3 delegates).

The training day starts at 8.15am and finishes at approximately 4pm.

Lunch/Refreshments are provided when training is carried out on Mark 1 Hire Premises.

 

Course Content

The aim of the PASMA training course is to ensure personnel are trained to a high level of competence to carry out inspections, create safe systems of work and to understand employees’ responsibilities.

The course is a mix of theory and practical instruction.  See our Training Day Schedule for full details.

 

What Do I Need to Bring?

You MUST bring Safety Boots/Hard Hat/High Visibility Vest, Weather Protective Clothing (ie. Fleeces, waterproofs, windproof, etc.).  We will also require details of your National Insurance number.

Lunch/Refreshments are provided by Mark One Hire Limited when training is carried out on our premises.

 

Where Does the Training Take Place?

Training can be undertaken at our fully equipped Training Rooms at both our Southend and Chelmsford Depots, where the appropriate equipment is supplied by us.

 

 

electricity transformers 011

 

Alternatively, training can be carried out on site (quotations available upon request).  Click here to find out more about our on site training requirements.

 

How Do I Book?

We run Open Courses throughout the year at both our Southend and Chelmsford Training Centres.  These courses are designed for both individuals and companies that require training but do not have sufficient numbers to train. 

For groups of 3+ we can also tailor individual training courses to customer demand, subject to the availability of our Instructors.  Please telephone our Training Line on 01702 561818 to discuss.  (Please note, this telephone line is manned outside normal working hours and after 5 rings will transfer to a mobile telephone number at no extra cost to you).

Alternatively, you can view our online Booking Calendar for available dates or email your enquiry to: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

Certification

Upon course completion, successful candidates are issued with a PASMA Training Identity Card and certificate as personal proof of competency.  Certification is normally valid for a period of 5 years, unless otherwise stated, and re-certification can be achieved through our refresher course.


Why come to Mark 1 Hire for your training?

  • We have two fully equipped, PASMA and IPAF approved training centres based at our Southend Head Office and Chelmsford Depot.
  • We have two fully qualified PASMA and IPAF Instructors who have a great knowledge of current Health and Safety requirements and hands on experience of the equipment.
  • Courses can be run to customer demand (subject to the minimum amount of delegates for each course).
  • We can accommodate late bookings.
  • We can offer training on a Saturday (at an additional cost).
  • We can accommodate single delegates by adding them to an existing course
  • Our training courses represent great value for money.
  • We have an indoor area where the practical session can take place in inclement weather.
  • We are an established, reputable company that pride ourselves in giving the best possible service to our customers.

 To find out more information about PASMA (Prefababricated Access Suppliers' and Manufacturers' Association) please visit their website http://www.pasma.co.uk

 
isoukas
Copyright Mark One Hire Limited 2009
Company Reg. No. 2310054 Reg. Office: Mark One Hire Limited, Millhouse, 32-38 East Street, Rochford, Essex SS4 1DB
PASMA Training Essex PASMA Training Southend PASMA Training Southend on Sea PASMA Training Rochford PASMA Training Leigh on Sea PASMA Training Westcliff PASMA Training Rayleigh PASMA Training Basildon PASMA Training Benfleet PASMA Training Billericay PASMA Training Canvey PASMA Training Canvey Island PASMA Training Grays PASMA Training Hockley PASMA Training Hornchurch PASMA Training Ilford PASMA Training Laindon PASMA Training Pitsea PASMA Training Purfleet PASMA Training Rainham PASMA Training Romford PASMA Training Stanford le hope PASMA Training Thurrock PASMA Training Upminster PASMA Training Wickford PASMA Training Chelmsford PASMA Training Baddow PASMA Training Braintree PASMA Training Burnham PASMA Training Burnham on Crouch PASMA Training Dunmow PASMA Training Epping PASMA Training Halstead PASMA Training Harlow PASMA Training Harwich PASMA Training Ingatestone PASMA Training Kelvedon PASMA Training Loughton PASMA Training Maldon PASMA Training Colchester PASMA Training Waltham Abbey PASMA Training Witham PASMA Training Woodham PASMA Training Woodham Ferrers PASMA Training Herts PASMA Training Hertfordshire PASMA Training Hatfield PASMA Training Chingford PASMA Training Leytonstone PASMA Training Stratford PASMA Training Whipps Cross PASMA Training Woodford Green PASMA Training Dagenham PASMA Training Redbridge PASMA Training Chigwell PASMA Training Tilbury PASMA Training South Ockendon PASMA Training Orsett PASMA Training Ongar PASMA Training Southminster PASMA Training Stansted PASMA Training East London PASMA Training East Anglia PASMA Training Enfield PASMA Training West Ham PASMA Training Gidea Park PASMA Training Collier Row PASMA Training Elm Park PASMA Training Harold Wood PASMA Training Harold Hill PASMA Training Becontree PASMA Training Chadwell Heath PASMA Training Chadwell St Mary PASMA Training Gants Hill PASMA Training Goodmayes PASMA Training Hainault PASMA Training Seven Kings PASMA Training Beckton PASMA Training Wanstead PASMA Training Canning Town PASMA Training East Ham PASMA Training Suffolk PASMA Training Kent PASMA Training Dartford PASMA Training Norfolk PASMA Training Cambridge PASMA Training London PASMA Training South East London PASMA Training City of London
Website Design by High Profile Ltd